This is an old revision of the document!

Pro2 Transmitter


The WeatherDuino Transmitter units are a very important part of the system. They not only transmit1) all the data to the WeatherDuino receiver, but are also the interface where you will connect all weather sensors2) that you intend to use.
Only one Transmitter unit is needed to build a fully featured WeatherDuino weather station, however, you can use up to four Transmitter units per system. The main reason why someone may want to use more than one Transmitter unit is to get a better positioning of the weather sensors. For example, one Transmitter may be used for sensors that are usually placed above the roof, like the anemometer and wind vane, and another Transmitter for the sensors that should be placed near the ground level, like temperature / humidity sensors, rain gauge, or even soil moisture sensors.


Notes and hints on assembling

A detailed parts list can be downloaded from here: WeatherDuino Pro2 TX v3.12 - Parts List.

Document under construction… please come back later.

Where I can get the WeatherDuino Pro2 Transmitter?

All info about prices, availability and how to order can be found here: WeatherDuino Pro2 Transmitter, prices and availability.

QR Code
QR Code pro2_transmitter (generated for current page)