start - WeatherDuino WiKi

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
{{:wiki:weatherduino_wiki.png?nolink&}}

====== Welcome to the WeatherDuino Wiki ======

This community Wiki and the associated Forum are the main sources of information about the WeatherDuino weather station project. There is no instruction book or manual about the project because it is continually being developed and improved, and any printed document would soon become out-of-date. Similarly, the WeatherDuino Wiki will always be a work in progress, so if you don't find the specific information that you are looking for right now, please come back later. We are adding and improving content very frequently.


===== What is WeatherDuino? =====

Put simply, WeatherDuino is a project which allows everyone with even a minimal knowledge of electronics and the Arduino environment to build a fully featured Weather Station.\\
All WeatherDuino systems emulate the communication protocol of a Davis VP2 weather station, so they are fully compatible with Cumulus 1, CumulusMX or any other software which can work with a Davis Vantage Pro weather station.

**Advantages of WeatherDuino:**

- Easy to build hardware\\
- Easy to use software (open source)\\
- Flexible and expandable

The WeatherDuino system has been developed to be flexible and easy to use.\\
It supports a wide range of weather instruments ([[:supported_weather_instruments|see list here]]), from low cost to high end weather instruments, so you are free to decide which instruments and brands most suit your requirements or budget.\\
WeatherDuino supports not only the most common weather instruments, but also other types of sensors, like dust sensors for Air Quality monitoring.\\
Below you can find detailed information about each of the existing WeatherDuino systems.\\
If you don't find an answer in the Wiki, please submit your question to the [[http://www.meteocercal.info/forum|WeatherDuino support forum]].

{{:wiki:weatherduino_header.jpg?nolink&  |WeatherDuino Pro2 PLUS}}


===== Published information and articles about WeatherDuino: =====

  * [[http://www.siliconchip.com.au/Issue/2015/March/WeatherDuino+Pro2+Wireless+Weather+Station%2C+Pt.1?res=nonflash/|A professional quality Weather Station based on Arduino]] Silicon Chip Magazine, Mar, Apr, May and Jun 2015 Editions \\ 
  * [[https://arduino.cz/stavba-meteo-stanice-weatherduino-pro2/|Stavba meteostanice WeatherDuino Pro2]] (CZ language) \\ 
  * [[https://arduino.cz/arduino-meteostanice-weatherduino-pro-2-podrobneji/|Arduino meteostanice WeatherDuino Pro2 podrobněji]] (CZ language) \\ 
  * [[https://arduino.cz/stavba-prijimaci-jednotky-meteo-stanice-weatherduino-pro2-plus/|Stavba přijímací jednotky meteo stanice WeatherDuino Pro2 PLUS]] (CZ language) \\ 
  * [[https://arduino.cz/stavba-vysilaci-jednotky-weatherduino-pro2pro2-plus/|Stavba vysílací jednotky WeatherDuino Pro2 / Pro2 PLUS]] (CZ language)

===== WeatherDuino Weather Stations: =====

|  @#e5ddda:{{ :wiki:pro2_logo.png?200x89&nolink |WeatherDuino Pro2 logo}}{{ :wiki:rx_greybox_05.jpg?200x133&nolink |rx_greybox_05.jpg}}  |   |  @#d7e6e7:{{ :wiki:wd_pro2_plus_logo.png?200x89&nolink |WeatherDuino Pro2 PLUS logo}}{{ :wiki:weatherduinopro2plus_rx_v130_revb_assembled_style.jpg?200x133&nolink |weatherduinopro2plus_rx_v130_revb_assembled_style.jpg}}  |   |  @#d7e6e7:{{ :wiki:weatherduino_pro2_compact_logo01.png?200x89&nolink |WeatherDuino Pro2 Compact logo}}{{ :wiki:pro2_compact_small.jpg?200x133&nolink |ajc2741_web.jpg}}  |   | @#d7e6e7:{{ :wiki:4Pro_DualBand_RX_WiKi.png?200x89&nolink |WeatherDuino 4Pro Dual Band}}{{ :wiki:4prodb_rx_frontview_480.jpg?200x133&nolink |ajc2741_web.jpg}}  |
| [[:pro2_receiver|]] - Out of Production \\  [[:pro2_transmitter|]]                                                                      |   | [[:pro2_plus_receiver|]] - Limited Availability\\  [[:pro2_transmitter|]]                                                                                                                                                    |   | [[:pro2_compact_receiver|]] \\  [[:pro2_transmitter|]]                                                                                                                    |   | [[:4pro_dual_band_receiver|]] \\  [[:4Pro_universal_transmitter|4Pro Universal Transmitter]]                                                                    |

\\
[[:weatherduino_receivers#weatherduino_recivers_-_comparison_chart|WeatherDuino Receivers - Comparison Chart]]\\
[[:weatherduino_receivers#which_weatherduino_receiver_is_best_for_me|Which WeatherDuino receiver is best for me]]

\\


===== WeatherDuino Environmental Measurement Equipment & Extras: =====

|  @#d7e6e7:{{  :wiki:wirelessdisplay_4pro_logo01.png?nolink&200x89  }}{{  :wiki:weatherduino_4pro_wd_esp8266_05_web.jpg?nolink&200x133  |WeatherDuino 4Pro Wireless Display logo}}  |   |  @#d7e6e7:{{  :wiki:weatherduino_4pro_airqualitymonitor_logo.png?nolink&200  }}{{  :wiki:aqm-iii_standard_640.jpg?nolink&200  |aqm_ii_01_rdm.jpg}}  |   |  @#d7e6e7:{{  :wiki:weatherduino_4pro_solaruvinterface.png?nolink&200  }}{{  :wiki:solar_interface_v330_kit01.jpg?nolink&200x133  |solar_interface_v330_kit01.jpg}}  |   |  @#d7e6e7:{{  :wiki:weatherduino_4pro_soilleafinterface.png?nolink&200  }}{{  :wiki:soilleaf_v300rev1_board_web.jpg?nolink&200x133  |ASCII}}  |
|[[:wireless_display_units|WiFi Wireless Display Units]]  |   |[[:air_quality_monitor_iii|]] \\  [[:air_quality_monitor_ii|]]  |   |[[:solar_uv_interface|]]  |   |[[:soil_leaf_interface|Soil / Leaf Interface]]  |


===== Third-party WeatherDuino Addons: =====

Third-party addons are systems created, developed and maintained by independent users.

^{{  :wiki:weatherduinopro2_snowheight.png?nolink&200x89  }}{{  :wiki:snowheighboard.jpg?nolink&200x198  |WeatherDuino 4Pro Wireless Display logo}}  |
|  \\ [[:snow_height_sensor|Snow Height Sensor]] \\  \\ by Engolling (Germany) \\   |

\\


===== 3D printable boxes for WeatherDuino devices: =====

^ {{ :wiki:wd_pro2_plus_logo.png?200&nolink }}{{ :wiki:pro2plus_case.jpg?200&nolink |pro2plus_case.jpg}}             ^   ^ {{ :wiki:weatherduino_pro2_compact_logo01.png?200x89&nolink |WeatherDuino Pro2 Compact logo}}{{ :wiki:pro2c_newenclosure01.jpg?200&nolink |Pro2C_newenclosure01.jpg}}  |   ^ {{ :wiki:wirelessdisplay_4pro_logo01.png?200x89&nolink }}{{ :wiki:pro2c_newenclosure01.jpg?200&nolink |Pro2C_newenclosure01.jpg}}  |   ^ {{ :wiki:weatherduino_4pro_airqualitymonitor_logo.png?200x94&nolink }}{{:wiki:aqmii_indoor.jpg?200x133&nolink|aqm_box1.jpg}}                                                                                                                                ^   ^ {{ :wiki:weatherduino_4pro_airqualitymonitor_logo.png?200x94&nolink }}{{:wiki:aqmii_indoor.jpg?200x133&nolink|aqm_box1.jpg}}  ^
|  Design by Jarek (Poland) \\  \\ [[https://www.thingiverse.com/thing:3137127|Click to get files for 3D printing]]  |   |  Design by Jarek (Poland) \\  \\ [[https://www.thingiverse.com/thing:4161865|Click to get files for 3D printing]]                                                      |   |  Design by Jarek (Poland) \\  \\ [[https://www.thingiverse.com/thing:4161865|Click to get files for 3D printing]]                  |   |  Design by Jarek (Poland) \\ Box for the Air Quality Monitor II\\  \\ [[https://www.thingiverse.com/thing:3608146|Outdoor version - Files for 3D printing]]  \\   \\  [[https://www.thingiverse.com/thing:3608306|Indoor version - Files for 3D printing]]  |   | Box for the Air Quality Monitor III\\  \\ [[https://www.thingiverse.com/thing:4880641|Files for 3D printing]]                 |


===== Share this Page in Social Networks =====

~~socialite~~

\\
Trace: • pro2_plus_receiver • solar_uv_interface • air_quality_monitor • pro2_compact_receiver • how_to_guides • air_quality_monitor_ii • start
Search

Navigation

Print/export

Tools

QR Code
