Differences
This shows you the differences between two versions of the page.
| Both sides previous revisionPrevious revision | |||
| configuring_cumulus_software [2018/05/21 00:50] – werk_ag | configuring_cumulus_software [2018/09/17 16:36] (current) – Minor edits tedem | ||
|---|---|---|---|
| Line 1: | Line 1: | ||
| ====== Configuring Cumulus Software ====== | ====== Configuring Cumulus Software ====== | ||
| - | Configuring the Cumulus software for an WeatherDuino weather station is mainly the same than configuring it for a Davis VP2, except in one detail, the use of the multipliers.\\ | + | Configuring the Cumulus software for a WeatherDuino weather station is mainly the same as configuring it for a Davis VP2, except in one detail, the use of the multipliers.\\ |
| - | Here we will try to explain their use and the reason why they must be set. For any other aspect of the Cumulus software configuration, | + | Here we will try to explain their use and the reason why they must be set. For any other aspect of the Cumulus software configuration, |
| **Cumulus 1: General configuration settings**\\ | **Cumulus 1: General configuration settings**\\ | ||
| Line 20: | Line 20: | ||
| \\ | \\ | ||
| First reason: | First reason: | ||
| - | Besides the Davis standard wind speed resolution of 1mph, WeatherDuino allows the use of two enhanced wind speed resolutions, | + | Besides the Davis standard wind speed resolution of 1 mph, WeatherDuino allows the use of two enhanced wind speed resolutions, |
| < | < | ||
| Line 35: | Line 35: | ||
| </ | </ | ||
| - | Depending on the selected wind speed resolution, multipliers for Wind Speed and Wind Gust must set accordingly. For standard | + | Depending on the selected wind speed resolution, multipliers for Wind Speed and Wind Gust must be set accordingly. For standard |
| Second reason:\\ | Second reason:\\ | ||
| - | WeatherDuino can work with a large variety of rain gauge models from several brands. So, depending on the resolution of the rain gauge used, it may be also necessary set a multiplier for the " | + | WeatherDuino can work with a large variety of rain gauge models from several brands. So, depending on the resolution of the rain gauge used, it may be also necessary |
| The value of the " | The value of the " | ||
| \\ | \\ | ||
| Line 60: | Line 60: | ||
| <WRAP round info 75%> | <WRAP round info 75%> | ||
| - | If you are running CumulusMX under a Linux SO, as is the case with a Raspberry PI, don't forget to configure the USB port in Cumulus.ini using Linux syntax: | + | If you are running CumulusMX under a Linux OS, as is the case with a Raspberry PI, don't forget to configure the USB port in Cumulus.ini using Linux syntax: |
| **WeatherDuino Pro2:** / | **WeatherDuino Pro2:** / | ||
| **WeatherDuino Pro2 PLUS:** / | **WeatherDuino Pro2 PLUS:** / | ||
| Line 66: | Line 66: | ||
| <WRAP round tip 75%> | <WRAP round tip 75%> | ||
| - | If you would like to show the name WeatherDuino on the web pages created by Cumulus, doing it is very simple and we will be thankful | + | If you would like to show the name WeatherDuino on the web pages created by Cumulus, doing so is very simple and we will be grateful |
| Under the [Station] section on the Cumulus.ini file, change the Model name to WeatherDuino.\\ | Under the [Station] section on the Cumulus.ini file, change the Model name to WeatherDuino.\\ | ||
| < | < | ||
