Differences
This shows you the differences between two versions of the page.
| Next revision | Previous revision | ||
| configuring_cumulus_software [2018/05/21 00:46] – created werk_ag | configuring_cumulus_software [2018/09/17 16:36] (current) – Minor edits tedem | ||
|---|---|---|---|
| Line 1: | Line 1: | ||
| ====== Configuring Cumulus Software ====== | ====== Configuring Cumulus Software ====== | ||
| - | Configuring the Cumulus software for an WeatherDuino weather station is mainly the same than configuring it for a Davis VP2, except in one detail, the use of the multipliers. Here we will try to explain their use and the reason why they must be set. For any other aspect of the Cumulus software configuration, | + | Configuring the Cumulus software for a WeatherDuino weather station is mainly the same as configuring it for a Davis VP2, except in one detail, the use of the multipliers.\\ |
| + | Here we will try to explain their use and the reason why they must be set. For any other aspect of the Cumulus software configuration, | ||
| **Cumulus 1: General configuration settings**\\ | **Cumulus 1: General configuration settings**\\ | ||
| Line 19: | Line 20: | ||
| \\ | \\ | ||
| First reason: | First reason: | ||
| - | Besides the Davis standard wind speed resolution of 1mph, WeatherDuino allows the use of two enhanced wind speed resolutions, | + | Besides the Davis standard wind speed resolution of 1 mph, WeatherDuino allows the use of two enhanced wind speed resolutions, |
| < | < | ||
| Line 34: | Line 35: | ||
| </ | </ | ||
| - | Depending on the selected wind speed resolution, multipliers for Wind Speed and Wind Gust must set accordingly. For standard | + | Depending on the selected wind speed resolution, multipliers for Wind Speed and Wind Gust must be set accordingly. For standard |
| Second reason:\\ | Second reason:\\ | ||
| - | WeatherDuino can work with a large variety of rain gauge models from several brands. So, depending on the resolution of the rain gauge used, it may be also necessary set a multiplier for the " | + | WeatherDuino can work with a large variety of rain gauge models from several brands. So, depending on the resolution of the rain gauge used, it may be also necessary |
| The value of the " | The value of the " | ||
| \\ | \\ | ||
| Line 59: | Line 60: | ||
| <WRAP round info 75%> | <WRAP round info 75%> | ||
| - | If you are running CumulusMX under a Linux SO, as is the case with a Raspberry PI, don't forget to configure the USB port in Cumulus.ini using Linux syntax: | + | If you are running CumulusMX under a Linux OS, as is the case with a Raspberry PI, don't forget to configure the USB port in Cumulus.ini using Linux syntax: |
| **WeatherDuino Pro2:** / | **WeatherDuino Pro2:** / | ||
| **WeatherDuino Pro2 PLUS:** / | **WeatherDuino Pro2 PLUS:** / | ||
| Line 65: | Line 66: | ||
| <WRAP round tip 75%> | <WRAP round tip 75%> | ||
| - | If you would like to show the name WeatherDuino on the web pages created by Cumulus, doing it is very simple and we will be thankful | + | If you would like to show the name WeatherDuino on the web pages created by Cumulus, doing so is very simple and we will be grateful |
| Under the [Station] section on the Cumulus.ini file, change the Model name to WeatherDuino.\\ | Under the [Station] section on the Cumulus.ini file, change the Model name to WeatherDuino.\\ | ||
| < | < | ||
